Silex has released a new version (12.2.x) of our UART AT Command Set for Qualcomm's Ultra Low Power WiFi IoT Soc QCA4010. Our new product is called SX-ULPGN-EVK-AT. The SX-ULPGN-EVK-AT is an evaluation kit for our SX-ULPGN module based on the QCA4010.
Using our new SX-ULPGN-EVK-AT, customers can quickly evaluate our AT Command Set. They can add a serial-to-Wi-Fi converter for their existing MCU based designs without porting any host driver. SX-ULPGN can offload the host MCU by performing all of the Wi-Fi related tasks such as low power WiFi network stack, security, and authentication.
|JTAG||OTA Programming||Station and AP Modes|
|Open System WPA-PSK, WPA2-PSK||None, WEP, TKIP, and AES(CCMP)||Enrollee (PIN/PBC)|
|IPv4, IPv6, DNS, SNTP, HTTP||SSL/TLS, DHCP, and WPS||IEEE802.11 Power Save Mode|
|Suspend (Store Recall, Power Off||Suspend(Sleep Wakeup, Host Deep Sleep)||TCP/IP Offload|
|UDP Offload||On-Boarding HTTP Server||HTTP Client|
|DHCP Client and DHCP Server||DNS Client and DNS Server||Socket API for up to 4 UDP or TCP Client/Server Sockets|
The SX-ULPGN-EVK-AT is the same hardware as SX-ULPGN-EVK, except:
- The modules will be programmed with Silex AT Command Set Version 2.12.2
- The module will be SX-ULPGN-2000-WW
Why SX-ULPGN-EVK-AT Is Useful?
- External Host MCU Interface over High Speed UART
- Supports the Use of Multiple UARTs
- Separate Command/Data
- Built-In Web Server
- Use it to Evaluate RF Performance for Potential Hostless Applications
To Learn More about our IoT Connectivity Solutions cointact us us at firstname.lastname@example.org